PA50

  • Features
  • Specifications
  • Support

PA50 Personal Monitor

*Dual input Channels, 1 x 1/4” unbalanced input jack and 1x 1/4” balanced XLR input jack
*3 band equalizer, independent volume control for each channel 
*50W RMS
*High sensitive 6.5” woofer, 1” tweeter
*AUX-IN and AUX OUT Jack
 

\

NUX PA50 is a powered monitor designed for e-drums, vocals, keyboards, acoustic and electric instruments.  Full-range powered monitor, the PA50 providing the richness of tone characteristic of all kinds of instruments. 2 input channels, 3-band equalizer, 1-inch tweeter and 6.5-inch woofer, the PA50 is perfect for studio recording and live performances.

\

\

PA50 comes with various onboard connectors which can cover a musician needs ultimately.

\



\
Small Gigs
The PA50 is very suitable for playing at some small venues or bar stages. Two NUX PA-50 Personal Monitor amps are enough for 4 people band sound monitoring requirements.
 
For example;
Plug your e-drums output and bass guitar to INPUT 1 of each PA50's.

Plug your microphone and keyboard to INPUT 2 of each PA50's.
Adjust the volume level and EQ for each PA50.
You are ready to rock!


\

\

For solo performances;
You can connect your guitar and microphone to PA50 simultaneously for solo performance.
 

  • Connect your guitar to INPUT 1 of PA50
  • Connect your microphone to INPUT 2 of PA50
  • Adjust the volume level and overall tone of PA50
\




























 

Full Range, Flat Response (FRFR)
NUX PA-50 personal monitoring amplifier has a flat frequency response and is equipped with a full range dynamic speaker and the input of each channel has independent EQ curve.

Channel 1 is improved for dynamic sound and designed to enhance LOW and HIGH frequencies.

Channel 2 is totally FLAT with a great accuracy and designed for direct compatibility for an IR loader such as NUX Solid Studio. You can take the advantage of using the sound (profile) of any guitar amplifiers everywhere.

And use the 3-band EQ and you can fine-tune your output to get a perfect result.

\


Also, if you are using the NUX Cerberus, you can use the output 2 and activate the speaker cabinet simulation;

\











 


















 

Features

Power Output
50 W (RMS)
Frequency Response
50-20Hz(-3dB)
Power Supply
AC100~120V, AC220~240V (50/60Hz)
Power consumption
≤88W
Speakers
6.5” Woofer, 1” Tweeter
Input Impedance
Chanel 1
2.2MΩ
Channel 2
100 KΩ
AUX INPUT
6.6 KΩ
EQ
Bass±10Hz@80Hz(shelving)
Middle
±10Hz@1.8Hz(peaking)
Treble
±10Hz@15Hz(shelving)
Dimensisons
361 *364 *325 mm
Weight
11.5Kg

Manual Download